| Mercury in Energy-Saving Bulbs | |
| Add:admin AddTime:2010-4-20 22:04:29 Read:0 Times | |
All fluorescent light bulbs contain mercury that can pose a health risk if broken bulbs are improperly handled or waste bulbs are not correctly recycled Compact Fluorescent Construction - CFLs use a phosphor coated glass envelope that contains a mixture of mercury, argon or another noble gas, and a tungsten coil. Power applied to the tungsten element in the bulb creates a stream of electrons that bounce around inside the bulb and excite the mercury vapor. The energized mercury electrons produce ultraviolet light that is absorbed by the phosphor coating, which is re-emitted as visible light. Newer CFLs contain around five milligrams of mercury. Industry experts point out that much more mercury is generated in producing the power needed by an incandescent bulb than that released by use and disposal of energy saving compact fluorescents. Cleaning Up a Broken CFL - The United Kingdom Department of Environment, Food and Rural Affairs (DEFRA) tells consumers that while mercury certainly isn't good for you, the levels found in a CFL shouldn't be cause for harm. What little risk that exists can be mitigated by proper cleanup and disposal of broken bulbs. DEFRA and the US EPA have similar suggestions for cleaning up broken bulbs. These procedures may seem like overkill, but they will ensure what little mercury is present in a broken bulb doesn't become a health problem. Advice for Cleaning Up After a Broken CFL: Leave the room and ventilate for 15 minutes or more | |
| Print || Close |